Matisse MM38 Acrylic Thickener (Rheology Modifier)

How does MM38 Acrylic Thickener create thick paint?
(Rheology Modifier)

MM38 Acrylic Thickener is a premium paint additive specifically formulated to elevate the viscosity of acrylic paints, enabling artists to effortlessly achieve captivating thick paint effects without compromising the vibrancy of colours. As an ideal alternative to traditional gels and impasto mediums, MM38 Acrylic Thickener serves as a rheology modifier, exerting a chemical influence on the flow and viscosity of the paint. This innovative medium ensures a consistent texture and thickness throughout the artwork without losing colour brilliance. It's worth noting that certain colours may exhibit a slightly reduced sheen in the dried film, which can be easily rectified by applying a suitable varnish after the paint has thoroughly dried

How do I use MM38 Acrylic Thickener to achieve thick paint effects?

• Add a few drops of MM38 Acrylic Thickener to your acrylic paint.
• You can use a palette knife to work the thickener into the paint thoroughly.
• Continue working the paint with the palette knife until you observe it thickening.
• Be patient, as the thickening effect may not be immediate.
• Use the paint mixture within 24 hours of preparation don't store 
• Aim to add approximately 2-3% of MM38 Acrylic Thickener to your paint for optimal results.
• Avoid adding more than 5-7% (depending on the original viscosity) to prevent paint thinning.

Note 

Each Matisse paint colour will require an added amount to reach the same consistency. Different colours may require differing amounts of the medium. Compatible with all Matisse acrylic colours. 

What is the drying time of MM38 Acrylic Thickener?

The drying time of MM38 Acrylic Thickener depends on the application's thickness. For a thin coat, a standard estimation is around 48 hours. However, it's important to note that prevailing atmospheric conditions during application, such as humidity, heat, and cold, can influence the drying time. Avoiding forced drying or using the product in temperatures exceeding 30? is crucial to ensure optimal drying results. Doing so may lead to premature skinning, which can trap water in the coating and produce an opaque or unsatisfactory finish.